iPhone Instructions

TO FIND YOUR PHONE IMEI NUMBER TYPE ( *#06#) ON YOUR HOME SCREEN OR Go to SETTINGS > GENERAL > ABOUT TO FIND IMEI # Please do not Submit IMEI if your phone is NOT Locked to AT&T USA 
You can check if your phone is an AT&T phone HERE
UNLOCKING INSTRUCTIONS
1.Insert a Sim Card and Connect to iTunes, wait for Unlock message.
2. Or just do a Restore with iTunes
Frequently ASKED QUESTIONS?.
 How do i set up MMS? http://www.unlockit.co.nz/mobilesettings/

Nokia Instructions

WARNINGNokia phone allow ONLY three wrong attempt and phone will lock up. Kindly understand the instruction carefully before entering the code into the phone.
 
NOTEIf you receive an error message while performing the instructions below, STOP. Please be aware that if an excessive amount of incorrect attempts are made, the phone will be permanently locked. Verify the IMEI by pressing *#06# and submit a new request.
 
For Nokia Lumia 900 Unlocking Instructions:
Nokia Lumia 900 Unlocking Instructions:
 
1. Switch ON your phone with a non accepted simcard
2. Phone will ask you to Enter Unlock Pin
3. Input the 8 digit Unlock Code
 
If code is Not working FOR LUMIA 900 ATT:
 
The workaround is this: Enter the incorrect code until you run out of your ten (10) attempts. Then you'll get the *real* network unlock message, with 32 attempts. Enter the same 8-digit code you've been entering,
 
http://www.youtube.com/watch?v=8SO5ZXQy1zM

 
For ROGERS, FIDO and ChatR:
Use +7 at the end first, if "Code Error" then try +1
 
For TELUS and BELL
Use +5 at the end first, if "Code Error" then try +1 or +7
 
For AT&T and T-Mobile USA:

  #PW+UNLOCKCODE+1# 

 

 
 
For UK Networks
Use +1 at the end first, if "Code Error" then try +7

Model:  For Most Nokia (Except Fido/Rogers and Model below)
1.    Insert an Authorized Sim Card and turn ON your phone. (Authorized Sim Card is the original carrier Sim Card that come with the phone)
2.    Press #
3.    Press * three times = P
4.    Press * four times = W
5.    Press * twice = +
6.    Enter the Unlock Code
7.    Press * twice = +
8.    Press 1, then # and the display should read "SIM Restriction Off"
Note: It should look similar to this: #pw+CODE+1#  (CODE is the Unlock Code we send you)
 
Model:  For Most Nokia for Fido/Rogers
1.    Insert an Authorized Sim Card and turn ON your phone. (authorized Sim Card is the original carrier Sim Card that come with the phone)
2.    Press #
3.    Press * three times = P
4.    Press * four times = W
5.    Press * twice = +
6.    Enter the Unlock Code
7.    Press * twice = +
8.    Press 7, then # and the display should read "SIM Restriction Off" IF "Code Error", use 1 instead of 7.
Note: It should look similar to this: #pw+CODE+7#  (CODE is the Unlock Code we send you) or #pw+CODE+1#
 
Model: T-Mobile Lumia 710
1.    Insert a T-Mobile Micro SIM Card
2.    Turn on the handset
3.    Click on Phone Button from the Home Page
4.    Next click on the Keyboard
5.    Enter in: ##782#
6.    Next Click the Call Button (a box will appear to enter the PIN for unlocking)
7.    Enter the 8 digit Unlock Code that was provided
8.    Click on the Enter Key (device should read "PIN Accepted")
Or
1.    Insert a Non T-Mobile Micro SIM Card.
2.    Turn on the handset. Note: the phone will display a message, "This SIM Card can only be used on specific networks. Contact you Customer Service Center for the Unlock Code. 10 attempts remaining."
3.    Enter the 8 digit Unlock Code that was provided.
4.    Click on the Enter Key (device should read "PIN Accepted").
 
Model: Nokia C3 
1.    Insert an Unauthorized Sim Card and turn ON your phone.
2.    Phone will display SIM is restricted
3.    Press OK to be able to enter the Unlock Code
4.    Type: #pw+CODE+1# and press OK (Rogers / Fido use #pw+CODE+7#)
Phone is unlocked!
Note: It should look similar to this: #pw+CODE+1# (CODE is the Unlock Code we send you)
 
**NOTE: For Nokia C3 ONLY, DO NOT use * , type #PW+ directly on the keypad and Replace CODE with the Unlock Code we send you.
 
Cable Instruction after 3 wrong attempt or Phone locked
If you are receiving "CANNOT UNDO RESTRICTION', " NOT ALLOWED", "PHONE RESTRICTIONS" message. This means your phone is hard-locked and you will have to use the following software:
 
Require the following:
1.    An Original USB Cable for your Nokia phone (Cannot be generic USB Cable). 
2.    The correct USB Cable Drivers.
3.    Installing the 'Nokia PC Suite' software that you can obtain from the Nokia website will install the appropriate USB Cable Drivers.  You can find it HERE
4.    A small software application that you can download from HERE.
5.    The Unlock Code from us.
 
Once you have all above requirement, follow these directions below:
1.    Switch on your phone without a SIM Card. You should be prompted to 'Start Phone Without SIM Card' or similar. Click 'Accept' or 'OK'. Your phone is now in offline mode. 
2.    Turn off all antivirus software on your computer.
3.    Connect your Nokia phone to the PC using the USB Cable. Your phone will display several options, PC Suite Mode', mass storage mode etc... stay in this screen, do not select any of the options.
4.    Start the SendCodeUsb application you downloaded earlier and click on the 'Read Phone Info' button. The application should display several lines of information. If it says "not found" replug your phone into the usb, and then click read phone info
5.    If the application still displays 'Not Found', your USB Cable Drivers are not correctly installed. In this case you will need to uninstall, then re-install the USB Cable Drivers. This procedure will not work unless the drivers are correctly installed. Trying an alternative USB Port may also help. DO NOT move on to the next step until you have successfully installed the USB Cable Drivers and the software can read the information from the phone. 
6.    Now make sure you check the 'Check For Fbus' checkbox. Also make sure the 'Level(1-7)' selection is set to the appropriate carrier.
 
For Rogers and Fido use +7 or +1
For all Telus devices use +5 or +1
For all UK devices use +1 and +7
For all T-Mobile USA devices use +1
For all AT&T devices use +1
 
7.    Enter ONLY the numbers of the correct Unlock Code into the 'Unlock Code (15 digits)' field e.g. if your correct Unlock Code was #pw+123456789012345+1# you would enter only 123456789012345 in this field)
8.    Click on the 'Send Unlock Code' b

 

HTC Instructions

Use the on-screen keyboard and make sure that wireless mode is OFF

  1. Insert a non accepted SIM card and turn ON your HTC HD2
  2. When prompted, enter unlock code
  3. Your HTC HD2 is now unlocked!

How to unlock HTC 7 Surround

  1. Insert a non accepted SIM card
  2. Phone will display enter “SIM network unlock PIN”
  3. Input the unlock code
  4. Phone is now unlocked!

How to unlock HTC Wildfire

  1. Insert a non accepted SIM card
  2. Phone will display enter “SIM network unlock PIN”
  3. Input the unlock code
  4. Phone is now unlocked!

Notice: If you see a message Sim lock. You can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phone's ROM which will reset the counter and allow to enter the code

HTC Inspire 4G Unlocking Instructions

  1. Insert a not accepted SIM card and turn ON your AT&T HTC Inspire 4G
  2. Your AT&T HTC Inspire 4G should show "Enter Special or Subsidy Code"
  3. Enter the unlock code
  4. Your AT&T HTC Inspire 4G phone is now successfully unlocked!

Unlocking Instructions for T-Mobile MyTouch 4G

1st method

  1. Insert a not accepted SIM card and turn ON your T-Mobile MyTouch 4G
  2. A dialogue screen will prompt you to enter the unlock code
  3. The box will say:
    Title: Special Code Required
    Dialog: Enter Code to enable SIM
    Box for Code: 1-8 digits
    Options: Enable or Cancel 
    In the upper right corner, the SIM is flashing where the signal strength should be. On entering the unlock code, a dialog box comes up saying "Authenticating Code".
    In case you see the "Waiting for Activation Screen", hit the Menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the "Waiting for Activation" screen disappears.
  4. Your T-Mobile MyTouch 4G is now unlocked!

2nd method

  1. Insert a not accepted SIM card and turn ON your T-Mobile MyTouch 4G
  2. Your T-Mobile MyTouch 4G will prompt for unlock code
  3. Enter unlock code
  4. Your T-Mobile MyTouch 4G is now unlocked!

Unlocking instructions for G1, G2, 2125, 3125, 8100, 8125, 8525, 8925 (Tilt), P4600 (Fuze), Dash, Dash 3G, Wing, Shadow, Excalibur 100, MDA, SDA, Touch Pro 2 (TP2), myTouch 3G, Magic

  1. Power on with non-allowed SIM card
  2. Enter unlock code when prompted
  3. Enter code using the ON-SCREEN keyboard (This is if the screen HAS an ON-SCREEN keyboard) when unlocking a Pocket PC phone
  4. Press OK
  5. Your HTC phone is now unlocked!

Problems with bypassing G1 GMail account: This link provides information on how to bypass the login if you are having issues when trying to use your phone with AT&T: Set-up AT&T on G1

How to obtain IMEI for Verizon HTC?

  1. Go to: Start > Settings > Phone > Networks
  2. Change from Global to GSM only
  3. Go back to the home screen
  4. Type *#06# and call key

Unlocking instructions for Verizon HTC Ozone, Imagio, Touch Pro 2

  1. Power ON your phone
  2. Go to: Start > Settings > Phone > Network
  3. Put phone on GSM mode
  4. Go to Security
  5. Go to Select SIM Manager
  6. Go to unlock SIM
  7. Phone will prompt for a code, enter the unlock code and press OK

Unlocking instructions for HTC Aria

  1. Insert a not accepted SIM card and turn ON your HTC
  2. When prompted, enter unlock code
  3. Attention! Use the onscreen keyboard and make sure that wireless mode is OFF
  4. Your HTC Aria is now unlocked!

Notice: If you see a message SIM lock, you can still make emergency calls your phone has a blocked counter due to several previous incorrectly entered unlock codes. The only solution in this case is to upgrade phone's ROM which will reset the counter and allow to enter the code


LG Instructions

Please find your model instructions here:

Authorized sim = From same network as provider locked to.

Unauthorized sim = From a different provider than phone is locked to.

Terminology:
NCK/SIM_UNLOCK= = Unlock Code 
SPCK = Service Provider Code

Submit: IMEI: 356525044437107
Result: NCK: 2918167327994401 NSCK: 3929847774723803 SPCK: 1389299809863784 CPCK: 8460406766580784 SIMCK: 4688930594592927

Explanation: 
Unlock Code: 2918167327994401;
Service Provider Code: 3929847774723803 or 1389299809863784


LG Unlock Code (WHICH TO USE FOR YOUR PROVIDER)?

All Networks (MOST) = Unlock Code can be 8 or 16 digits Usually NCK (Network)
Fido/Telus/Tesco = REQUIRE both Unlock Code and Service Provider Codes (NCK AND SPCK)


New and LG Most Models

1.    Insert an Unauthorized Sim Card

2.    Phone will display \"Phone Restricted\"

3.    Select \"Cancel\" and phone will show \"Phone Restriction Code\"

4.    Enter Unlock Code

5.    Select OK

1.    The handset is now successfully unlocked

 

Model:  LG C2000, CG225

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    The phone will display \"Phone Restricted\"

3.    Select \"Cancel\"

4.    The phone will display \"Phone Restriction Code\"

5.    Enter Unlock Code

6.    Select OK

7.    The handset is now successfully unlocked

 

Model: LG Mytouch 4G (E739)

1.    After turning on your mobile phone with no simcard

2.   Get to the dial screen and press 2945#*739#

3.    Click \"Network\"

4.    Click \"Unlock Network\"

5.    Enter Unlock Code, press OK

6.    The handset is now successfully unlocked


Model: LG Mytouch 4G (E739)


1: Turn on phone without Sim card.

2: Dial 2945#*769#.



LG DoublePlay Unlocking Instructions:

1. Turn on phone with a non-accepted SIM card
2. Phone will prompt you for unlock code
3. Enter code that we provided
4. Your phone is unlocked!

or

1. Turn on phone with no simcard
2. Go to the dial screen and press 2945#*729#
3. Enter code that we provided
4. Your phone is unlocked!


 

Model: LG C800 MyTouch Q

 

1.    After turning on your mobile phone with no simcard

 

2.    Type 2945#*800#

 

3.    Click \"Network\"

 

4.    Click \"Unlock Network\"

 

5.    Enter Unlock Code, press OK

 

6.    The handset is now successfully unlocked

 

 

 


Model: LG Fathom VS750

1.   Go to Settings

2.   Advanced Settings

3.   Personal

4.   Slide to right to security

5.  Tap Sim lock and enter code.

 

 

Model: LG CB630 Invision

1.    Insert an Authorized Sim Card

2.    Type *#865825#

3.    Press CALL

4.    Phone should ask for unlock code, enter code

5.    The handset is now successfully unlocked

 

Model: LG CE110

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    The phone display “Invalid Smart Chip”

3.    Select \"Cancel\"

4.    The phone displays \"Phone Restriction Code\"

5.    Enter Unlock Code

6.    Select OK

7.    The phone may reboot and the unlock is completed

 

Model: LG CF360

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Power on the handset- phone will display \"phone restricted\"

3.    Select \"Cancel\" - phone will display \"phone restriction code\"

4.    Enter the SIM unlock code

5.    Select \"OK\" - the handset is now successfully unlocked

 

Model:  LG CT810 Incite

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*810#

3.    A Menu will open up

4.    Select Sim unlock

5.    Enter Unlock Code

6.    Press OK

7.    The phone will reboot and the unlock is complete

 

Model: LG CU320

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Enter 277634#*#

3.    Enter Unlock Code

4.    Access the Sub-Menu \"Sim Test\" in the Test Mode

5.    Enter 2945#*#

6.    Access the Sub-Menu \"Sim Unlock\" which is activated after the special code

7.    Enter Unlock Code in the \"Enter Unlock Code\"

8.    Phone is now unlocked

 

Model:  LG CU400 & CU405

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    The phone display “Invalid Smart Chip”

3.    In Idle screen, enter 159753#*#

4.    Phone will display \"Enter NCK, Remaining 5\"

5.    Enter Unlock Code

6.    Select OK

7.    The phone may reboot and the unlock is completed

 

Model:  LG CU500

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    The phone display “Invalid Smart Chip”

3.    If the phone DOES NOT display invalid smartchip, please power off and on again.

4.    In Idle screen, enter 159753#*#

5.    Phone will display \"Enter NCK, Remaining 5\"

6.    Enter Unlock Code

7.    Select OK

8.    The phone may reboot and the unlock is completed

 

Model: LG CU515, CU757 Trax

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Select 1 and then 1 again

4.    Enter Unlock Code

5.    Press OK

6.    The phone may reboot and the unlock is completed

 

Model:  LG CU720, TU720 & All LG Shine Series

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Enter Unlock Code

4.    Press OK

5.    The phone may reboot and the unlock is completed

 

Model:  LG CU915 & CU920 Vu 

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    Device should say “Network Lock Deactivated”

7.    Phone may automatically reboot and is now unlocked

 

Model: LG E720, E720b Chic

1.    Insert an Authorized Sim Card

2.    Type 2945#*88110#

3.    Phone should ask for \"USim Unlock\"

4.    Enter the unlock code

5.    The handset is now successfully unlocked

Or

1.    Insert an Unauthorized Sim Card

2.    Type *#865825#

3.    Select \"USim Unlock\", then Select Network Lock

4.    Enter the unlock code

5.    Select OK

6.    Phone may reboot

Or

1.    Insert an Authorized Sim Card

2.    Type 2945#*720#

3.    Phone should ask for \"USim Unlock\"

4.    Enter the unlock code

 

Model: LG e739 MyTouch

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Type 2945#*739#

3.    Click \"Network\"

4.    Click \"Unlock Network\"

5.    Enter Unlock Code, press OK

6.    The handset is now successfully unlocked

 

Model: LG E900 Optimus 7

1.    Insert an Unauthorized Sim Card

2.    Type Sim Card PIN Code and submit

3.    The message \"Please call your network provider to get the unlock\" will appear

4.    At bottom of the screen, show keyboard with # and *, and asking for you to \"Type PIN\", enter code

5.    The handset is now successfully unlocked

 

Model: LG E900h

1.    Insert an Unauthorized Sim Card

2.    Phone will ask for \"SIM PIN\"

3.    Enter Unlock Code

4.    Press OK

5.    The handset is now successfully unlocked

 

Model: LG F2250

1.    Insert an Unauthorized Sim Card

2.    Type 2945#*3311#

3.    Phone shows saved, then return to startup screen

4.    Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show “Enter NCK”

5.    Enter Unlock Code and press OK

 

Model: LG G2x P999 or P990

 

 

1. Input a non-accepted simcard
2. Go to the unlock menu
3. Input the unlock code
4. Phone is unlocked!

 

or

 

1. Power phone ON with original SIM
2. Type 2945#*999# to enter unlock menu
3. Enter the unlocking code

 

or

 

1. Power phone ON with original SIM
2. Type 2945#*990# to enter unlock menu
3. Enter the unlocking code


 

Model: LG GB255g

1.    Insert an Unauthorized Sim Card

2.    Type 2945#*71001#

3.    Select \"USim Unlock\" and press OK when prompted for unlock code

4.    Select Service Provider Lock. You will see this message \"You are about to SIM unlock your phone. Continue? Select Yes

5.    Enter the unlock code and press OK

6.    Enter the unlock code again and press OK

7.    The handset is now successfully unlocked

 

Model:  LG GD510 Pop

1.    Insert without a Sim Card (Some version need an authorized Sim Card) and turn ON your phone

2.    Enter 2945#*510#

3.    Select \"Network Unlock\" option

4.    Enter Unlock Code

5.    Press OK

 

Model: LG GD570 Pop

1.    Insert an Authorized Sim Card

2.    Type *#865625#

3.    Screen says you have entered unlock function, and cautions that after 10 failed attempts the phone will be permanently locked.  Press OK to continue.

4.    The phone will ask you to input the unlock code twice, do it. Be careful and type the code exactly as given

5.    After entering the code a second time, the phone will be unlocked.

6.    Press OK to exit and the pone will reboot by itself

 

Model: LG GD710 Shine II

1.    Insert an Unauthorized Sim Card

2.    Type *#865825#

3.    The Phone will ask you to input the unlock code twice, enter code

4.    The handset is now successfully unlocked

 

Model:  LG GR500 Xenon

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    Device should say “Network Lock Deactivated”

7.    Phone may automatically reboot and is now unlocked

Or

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Phone will display \"Phone restricted\"

3.    Select \"Cancel\", phone will display \"Phone restriction code\"

4.    Enter Unlock Code

5.    Press OK

6.    Device should say “Network Lock Deactivated”

7.    Phone may automatically reboot and is now unlocked

 

Model: LG GS170

1.    Power phone ON without SIM

2.    Type 2945#*71001# to enter unlock menu

3.    Enter unlock code

 

Model: LG GS290 Guide, Cookie

1.    Insert an Unauthorized Sim Card

2.    Type 2945#*290#

3.    The Phone will ask you to input the unlock code twice, enter code

4.    The handset is now successfully unlocked

 

Model: AT&T GS390 Prime GoPhone

Notice:  Do not type 2945#*390# as this may cause an “Unknown Error” message

1.    Insert an Unauthorized Sim Card

2.    Power on the Device

3.    Device will display with Invalid SIM Network Lock

4.    Press Unlock

5.    You see SIM Unlock Process

6.    Select Yes

7.    Enter CODE and press OK

8.    Re-enter the CODE and select “OK”

9.    Your phone is unlocked.

 

Model: LG GS505 Sentio

1.    Power phone ON with original SIM

2.    Type 2945#*505# to enter unlock menu

3.    Enter the unlocking code

 

Model:  LG GC900, GT360, GT810, KC550, KF600, KP230, KP500, KP501, KP270, KS360, KM500, KM900, GR500 Xenon Method 3

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*71001#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model: LG GT365 Neon

1.    Insert an Authorized Sim Card

2.    Type *#865825#

3.    Press CALL

4.    Phone should ask for unlock code, enter code

5.    The handset is now successfully unlocked

 

Model: LG GT505

1.    Power on the phone without any sim card

2.    Type 2945#*505#

3.    The Phone will ask you to input the unlock code twice, enter code

4.    The handset is now successfully unlocked

 

Model: LG GT540 Optimus

1.    Insert an Authorized Sim Card

2.    Type 2945#*540#

3.    Tap empty space to enter code

4.    The Phone will ask you to input the unlock code twice, enter code

5.    The handset is now successfully unlocked

 

Model: LG GU297 Wink

1.    Insert an Unauthorized Sim Card

2.    Phone show \"Enter Special or Subsidy Code\"

3.    Enter the unlock code

4.    The handset is now successfully unlocked

 

Model: LG GW300 Viewty or Gossip

1.    Insert an Authorized Sim Card

2.    Type 2945#*300#

3.    A menu will pop up, select SIM Unlock

4.    Enter your unlock code and hit OK

5.    Phone may reboot

Or

1.    Power phone ON without SIM

2.    Type 2945#*71001# to enter unlock menu

3.    Enter unlock code or codes

Or

1.    Insert an Unauthorized Sim Card - phone will display \"phone restricted\"

2.    Select \"Cancel\" - phone will display \"phone restriction code\"

3.    Enter the SIM unlock code

4.    Select \"OK\" - the handset is now successfully unlocked

 

Model: LG GW520

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*71001#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is complete

 

Model: LG GW620, GW620r

1.    Insert an Authorized Sim Card

2.    Enter 2945#*620#

3.    A menu will pop up, select sim unlock

4.    Enter your unlock code and press OK

5.    The phone will then reboot and the unlock is complete

 

Model:  LG KC910, KF910 (aka LG Prada)

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*910#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG KE850 Prada

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter Sim PIN if required

3.    Enter 2945#*8501# and press the call button (middle button, bottom of the screen)

4.    SIM unlock mode will appear on screen

5.    Enter Unlock Code

6.    Select Reboot

7.    Turn phone OFF, and then turn back ON again. Phone is now unlocked

 

Model:  LG KE990 & KU990 Viewty Method 1

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Press telephone icon at bottom of screen to bring up the phone keypad

3.    Enter 2945#*990#

4.    Sim unlock mode will open up

5.    Enter Unlock Code

6.    Press OK

7.    The phone will reboot and the unlock is completed

 

Model:  LG KE990 & KU990 Viewty Method 2

1.    Power On the phone without a Sim Card

2.    Hold \"Camera\" + \"Lock\" button

3.    You will get keypad and Enter 2945#*990#

4.    Enter Unlock Code

5.    Your cell phone will be restart

6.    Turn off cell phone and insert Sim Card

7.    Unlock is completed

 

Model: LG KF300

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Phone alert \"Insert Correct Card\"

In the screen, right under you see deblokkeren (Dutch), Click on it

3.    Click \"Network Lock Off\"

4.    Enter Unlock Code

5.    Select OK

 

Model: LG KF390, KF390q, CF360 Method 2

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Select Unlock USIM

4.    Select Network Lock

5.    Enter Unlock Code

6.    Select OK

 

Model: LG KF600

1.    Insert an Authorized Sim Card

2.    Type 2945#*71001#

3.    A menu will pop up, select Sim unlock

4.    Enter your unlock code and press OK

5.    The phone will then reboot and the unlock is complete

 

Model:  LG KF700 (aka LG Virgo)

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*700#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG KF750

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*750#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG KF755d

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*755#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG KM900 Arena

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*71001#

3.    Menu appears, select Security>Sim Lock

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG KP100

1.    Insert an Authorized Sim Card and turn ON the phone

2.    Enter 2945#*20001#

3.    Enter Unlock Code

4.    Phone will reboot and phone is unlocked.

 

Model:  LG KP265

1.    Insert an Authorized Sim Card and turn ON the phone

2.    Enter 2945#*265#

3.    Menu will appear

4.    Select Settings

5.    Select Security

6.    Select Sim Lock

7.    Select Network

8.    Select Deactivate

9.    Enter Unlock Code

 

Model: LG ME550

1.    Insert an Authorized Sim Card and turn ON the phone

2.    Enter 2945#*71101#

3.    Menu will appear

4.    Select Settings

5.    Select Security

6.    Select Sim Lock

7.    Enter Unlock Code

8.    Press OK

 

Model: LG ME970

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*9701#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model: LG P500h Optimus T

1.    Insert an Unauthorized Sim Card

2.    Type 2945#*500#

3.    The Phone will ask you to input the unlock code twice, enter code

4.    The handset is now successfully unlocked

 

Model: LG P505 Phoenix

1.    Insert an Authorized Sim Card

2.    Type 2945#*506#

3.    Tap empty space to enter code

4.    The Phone will ask you to input the unlock code twice, enter code

5.    The handset is now successfully unlocked

Or

1.    Turn the phone on and type *#865825#

2.    Select Yes to continue

3.    Enter the unlock code twice

4.    Phone should said \"Network Lock Deactivated\"

5.    Phone may reboot

 

Model: LG P506 Thrive

1.    Insert an Authorized Sim Card

2.    Type 2945#*506#

3.    Tap empty space to enter code

4.    The Phone will ask you to input the unlock code twice, enter code

5.    The handset is now successfully unlocked

Or

1.    Turn the phone on and type *#865825#

2.    Select Yes to continue

3.    Enter the unlock code twice

4.    Phone should said \"Network Lock Deactivated\"

5.    Phone may reboot

 

Model: LG P509 Optimus T

1.    Insert an Unauthorized Sim Card

2.    Type 2945#*509# to enter unlock menu

3.    The Phone will ask you to input the unlock code twice, enter code

4.    The handset is now successfully unlocked

Or

1.    Power phone ON without SIM

2.    Type 2945#*509# to enter unlock menu

3.    Tap empty space to enter code

4.    The Phone will ask you to input the unlock code twice, enter code

5.    The handset is now successfully unlocked

Or

1.    Insert an Authorized Sim Card

2.    Type 2945#*509#

3.    Tap empty space to enter code

4.    The Phone will ask you to input the unlock code twice, enter code

5.    The handset is now successfully unlocked

 

Model: LG P999 G2x

5.    Insert an Authorized Sim Card

6.    Type 2945#*999#

7.    The Phone will ask you to input the unlock code twice, enter code

8.    The handset is now successfully unlocked

Or

6.    Insert an Unauthorized Sim Card

7.    Phone will display \"Phone Restricted\"

8.    Select \"Cancel\" and phone will show \"Phone Restriction Code\"

9.    Enter Unlock Code

10.  Select OK

2.    The handset is now successfully unlocked

 

Model: LG Quantum

1.    Insert an Unauthorized Sim Card

2.    Phone will display \"Phone Restricted\"

3.    Select \"Cancel\" and the phone will display \"Phone Restriction Code\"

4.    Enter Unlock Code

5.    The handset is now successfully unlocked

 

Model: LG TE365 Neon

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Select Yes

4.    Enter Unlock Code

5.    Enter Unlock Code again.

6.    Press OK

7.    The phone may reboot and the unlock is completed

 

Model:  LG TU330

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model: LG TU550

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*9701#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model: TU915

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*9701#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

Or

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter *#865625#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG U300

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 815118#*#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG U310

1.    Turn ON the phone without Sim Card

2.    Enter 815118#*#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model:  LG U400

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*88110#

3.    Phone will prompt “Unlock Sim”

4.    Press OK

5.    Phone will prompt “Network Unlock”

6.    Press OK

7.    Phone will prompt “Input Network Control Key”

8.    Enter Unlock Code (If the unlocking code comes with only 7 digits, add 0 in front of the 7 digit code. If the unlocking code comes with only 6 digits, add 00 in front of the 6 digits code)

9.    Press OK

10.  The phone may reboot and the unlock is completed

 

Model: LG U830

1.    Insert 3G Sim Card and turn ON your phone

2.    Enter 94471877#*#

3.    Select \"Unlock USIM\"

4.    Select \"Network Unlock\"

5.    Enter Unlock Code

6.    Phone will show \"Network Unlock Success\" and The phone will reboot and the unlock is completed

 

Model:  LG U970

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter 2945#*970#

3.    Sim unlock mode will open up

4.    Enter Unlock Code

5.    Press OK

6.    The phone will reboot and the unlock is completed

 

Model: LG U81xx

1.    To bring up the unlock menu on the phone with a SIM card, type 2945#*88110#

2.    Enter Unlock code

In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#

 

Model:  LG U8150 Method 1

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Enter 277634#*#

3.    Select Menu then \"SIM Lock\"

4.    Enter Unlock Code

 

Model:  LG U8150 Method 2 with Service Provider lock

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Enter 277634#*#

3.    Select Menu then \"SIM Lock\"

4.    Enter Unlock Code

5.    The phone will then prompt \"Input Network Control Key\" (Enter the 8 digit unlock code.  Press OK.  If the unlock code comes wiht 7 digits, add a 0 in front.  If the unlock code comes with 6 digits, add 00 in front

6.    It should give you the message Success

7.    The phone will then prompt for Unlock Sim.  Press OK

8.    The phone will then prompt Network Unlock/Lock.  If you scrool down, you will see a message Enter SP Lock. Enter Service Provider Code

9.    Then press OK

 

Model: LG U8210

1.    Insert an Unauthorized Sim Card, enter Pin code then validate

2.    Type 277634#*#

3.    Shows test menu, choose sim test menu

4.    Type: 2945#*#, choose Sim Unlock menu

5.    Phone shows \"Enter NCK\"

6.    Enter Unlock Code, then hit OK

 

Model: LG X2 Optimus

1.    Insert an Unauthorized Sim Card

2.    Type 2945#*990#

3.    The Phone will ask you to input the unlock code twice, enter code

4.    The handset is now successfully unlocked

 

Model:  ALL other model

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter:
              LG 510W: Enter 2945#*5101#
              LG 1200 & B1200: Enter 1945#*5101#
              LG 5200 & 52200: Enter 2945#*5221#
              LG 5300: Enter 2945#*5301#
              LG 5400: Enter 2945#*5401#
              LG 7020: Enter 2945#*70001#
              LG 7100: Enter 2945#*7101#
              LG 1100: Enter 2945#*1201# or 2945#*70001#
              LG 7250T: Enter 2945#*70001#
              LG C2200: Enter 2945#*2201#
              LG C3310: Enter 2945#*3311#
              LG T5100: Enter 2945#*5301#

3.    Select Menu

4.    Select Settings

5.    Select Security

6.    Select Network Provider

7.    Select Deactivate

8.    Enter Unlock Code

 

Model:  Classified by Model

1.    Insert an Authorized Sim Card and turn ON your phone

2.    Enter:
              LG C3100: Enter 2945#*3101#
              LG C3380: Enter 2945#*7101#
              LG F2300: Enter 2945#*7101#
              LG KE260: Enter 2945#*2601#
              LG KE970: Enter 2945#*9701#
              LG KG120: Enter 2945#*1201#
              LG KG220: Enter 2945#*1201#
              LG KG240: Enter 2945#*3311#
              LG KG280: Enter 2945#*7101#
              LG KG290: Enter 2945#*7101#
              LG KG800: Enter 2945#*7101#
              LG KU250: Enter 2945#*250#
              LG KU380: Enter 2945#*380#

3.    Select Menu

4.    Select Settings

5.    Select Security

6.    Select Sim Lock

7.    Enter Unlock Code

8.    Press OK

9.    The phone may reboot and the unlock is completed

 

Model:  Classified by Model

1.    Insert an Unauthorized Sim Card and turn ON your phone

2.    Enter:
              LG C3100: Enter 2945#*3101#
              LG C3380: Enter 2945#*7101#
              LG F2300: Enter 2945#*7101#
              LG KC550: Enter 2945#*71001#
              LG KE260: Enter 2945#*2601#
              LG KF240: Enter 2945#*240# or 2945#*2401#
              LG KF600: Enter 2945#*71001#
              LG KF750: Enter 2945#*750#
              LG KG120: Enter 2945#*1201#
              LG KG220: Enter 2945#*1201#
              LG KG240: Enter 2945#*3311#
              LG KG275: Enter 2945#*20001#
              LG KG280: Enter 2945#*7101#
              LG KG290: Enter 2945#*7101#
              LG KP270: Enter 2945#*270#
              LG KS500: Enter 2945#*500#
              LG KT520: Enter 2945#*520#
              LG KU250: Enter 2945#*250#
              LG KU311: Enter 815118#*#
              LG KU380: Enter 2945#*380#
              LG KU580: Enter 2945#*580#
              LG KU800: Enter 82652#*#
              LG L600v: Enter 815118#*#
              LG U400: Enter 2945#*88110#
              LG U8150: Enter 277634#*#
              LG U8210: Enter 277634#*#
              LG U8500: Enter 277634#*#

3.    Enter Unlock Code

4.    Press OK

5.    The phone may reboot and the unlock is completed


 Blackberry Instructions:

 

WARNING:  If after you enter "meood" or "mepd" from the unlock instructions below and your "Enter Network MEP" box show less than 4 try left (default is 10 try left).  STOP, do not enter the unlock code.If you enter the wrong code and get to 0 try left, your Blackberry will be permanent locked. Therefore, with MEP Name, you are 100% sure that the unlock code is correct.


QUICK NOTE (Canada PHONES ONLY):  If you order a Canadian Locked Blackberry Provider. Please make sure you read this first. Some phones requires MEP2 (Network Unlock) while some require MEP4 (Service Provider).


Bell Mobility:    Requires MEP4 Code

Fido/Rogers:   Requires MEP2 Code

Koodo:             Requires MEP4 Code

Mobilicity:         Requires MEP2 Code

Telus:               Requires MEP4 Code

Videotron:        Requires MEP2 Code

Virgin:               Requires MEP2 Code

Wind:                Requires MEP2 Code

 

BlackBerry OS 7 Instructions (i.e. 9900, 9930, 9810, and 9860)

  • Insert a non accepted sim card in your phone and turn it on.
  • You will be prompted to enter an unlock code (aka MEP2 Code).
  • Click Yes.
  • Enter the unlock code (MEP2) and press enter.
  • Phone is now UNLOCKED!

 

BlackBerry OS 6 Instructions (i.e. 9780 and 9800)

  • Method 1
  • Insert not accepted sim card in your phone and turn it on.
  • You will be prompted to enter an unlock code (aka MEP2 Code).
  • Click Yes
  • Enter the unlock code (MEP2) and press enter
  • Phone is now UNLOCKED!
  • Go to "Manage Connections" and turn Mobile network on.
  • Method 2
  • Go to Options -> Device
  • Select advanced system settings => and then Sim card
  • Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
  • Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
  • You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code (MEP2) and press track pad to confirm.
  • Your phone is now unlocked!

 

 

Model:  6xxx 7xxx: Example; 6230, 7100, and 7290 etc.:

Before you start, you MUST take out the Sim Card & turn OFF ALL wireless radios

1.    Press the Menu key.

2.    Select Options / Settings.

3.    Select Sim Card.

4.    Enter MEPD (not case sensitive), Note: When typing in MEPD, the letters will not appear on the screen.

5.    Then enter MEP Hold Alt Key and type number 2.  NOTE: You must use the "alt" key to enable numbers, example: enter MEP hold "ALT key" and enter 2.  Note: When typing in MEP2, the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.  If you do not see "Enter Network MEP" box, you didn't type in MEP2 properly.

 

Model:  7100, 8100, 8110, 8120 & 8220, 9100:

Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios

1.    Press the Menu key.

2.    Scroll to Turn Wireless Off and press the trackball (Will show Turn Wireless ON).

3.    Scroll to Options and press the trackball.

4.    Scroll to Advanced Options and press the trackball.

5.    Scroll to SIM Card and press the trackball.

6.    Type MEOOD (not case sensitive). This step opens up the personalization on the device.

7.    Type MEOO, then hold ALT key and type number 2.  Note: When typing in MEOO2 the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

8.    Enter Unlock Code.

9.    Press the Enter Key. (Make sure you press the Enter Key within 5 second or you have to enter the unlock code again).


Model:  8700, 8700c, 8700g, 8700r

Before you start, you MUST have a Sim Card & turn OFF ALL wireless radios

1.    Press the Menu key.

2.    Scroll to and select Manage Connections. Select Turn All Connections Off.

3.    Press the red end key or the Escape key to go back to the Home screen.

4.    Scroll to and select the Setting icon.

5.    Scroll to Options.

6.    Scroll to and select Advanced Options.

7.    Scroll to and select SIM Card.

8.    Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.

9.    Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP and hold "Alt" key and 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

10.  Enter the unlock code.

11 .Press the Joydial to confirm ("Code Accepted should display)

12.  Press and hold the red End key to turn the handheld off and then back on.

13.  Once the device has powered on, follow steps 1 & 2 and restore connections.

 

Model: 8300, 8310, 8320, 8520, 8800, 8820, 8900, 9000, 9630, 9650, 9700, 9800

Before you start, you MUST have a Sim Card (could be Active or Inactive) & turn OFF ALL wireless radios

1.    Press the Menu key.

2.    Scroll to and select Manage Connections. Select Turn All Connections Off.

3.    Press the red end key or the Escape key to go back to the Home screen.

4.    Scroll to and select the Options icon.

5.    Scroll to and select Advanced Options.

6.    Scroll to and select SIM Card.

7.    Type MEPD Note: When typing in MEPD the letters will not appear on the screen. This step opens up the personalization on the device.

8.    Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP and "Alt" and number 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9.    Enter the unlock code.

10.  Press the trackball ("Code Accepted should display)

11.  Press and hold the red End key to turn the handset off and then back on.

12.  Once the device has powered on, follow steps 1 & 2 and restore connections.

 

Method 1: Model: 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have an Unauthorized Sim Card inserted.  Unauthorized Sim Card is a Sim Card that is NOT belongs to the provider of the phone.  Example:  If you have a Verizon phone, you need to insert a T-Mobile Sim Card inside the phone before turn it on.

1.    Power on the phone.

2.    Phone will said "MEP check failed.  Do you want to enter MEP unlock code".  Select Yes.

3.    "Enter Network MEP code (# left)".  Enter the unlock code.

4.    Press Enter, you should see "Code Accepted"

5.    You need to check Network Connection is set on GSM/UMTS.  Menu>Manage Connection>Mobile Network Options and make sure it GSM/UMTS.

6.   Once GSM/UMTS is selected.  You can now ready to make phone call.

 

Notice:  If the network not working after your phone is fully charged and unlocking process "Code Accepted".  You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network.  Now it should work. (Verizon 8830 World Edition DOES NOT work inUSA )


Method 2: Model: 8830, 9500, 9530 Storm, 9550 Storm 2
Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.

1.    Press the Menu key

2.    Scroll to and select Manage Connections. Select Turn All Connections Off.

3.    Press the red end key or the Escape key to go back to the Home screen.

4.    Scroll to and select the Options icon.

5.    Scroll to and select Advanced Options.

6.    Scroll to and select SIM Card.

7.    Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.

8.    Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP "Alt" and number 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9.    Enter the unlock code.

10.  Press Enter (Press the trackball for 8830), you should see "Code Accepted"

11.  Press and hold power key to turn the handset off and then back on.

12.  Once the device has powered on, follow steps 1 & 2 and restore connections.

 

Notice: If the network not working after your phone is fully charged and unlocking process "Code Accepted".  You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network.  Now it should work. (Verizon 8830 World Edition DOES NOT work inUSA )

Model: For Telus & Bell Mobility, Some Fido model and all carrier that have Service Provider block (MEP4).

Sometime we send you two sets of Unlock Code, use the code as a set;

Example:MEP2:43237528-AND-MEP4:35848078ORMEP4:4371476728858074.

Set 1:MEP2:43237528-AND-MEP4:35848078.

Set 2:MEP4:4371476728858074.

DO NOT mix these two sets. Determine which option look similar to your phone and then follows the correct instructions. 

1.    If your Blackberry has only Network "Active", then chooseOption 1.  You ONLY need the MEP2 code we send you.

2.    If your Blackberry has both Network and Service Provider "Active", then chooseOption 2.  You need both the MEP2 and MEP4 code we send you.

3.    If your Blackberry has only Service Provider "Active", then chooseOption 3.  You ONLY need the MEP4 code we send you.

 

Option 1:Option 2Option 3
ID: 8901260700015407027ID: 8901260700015407027ID: 8901260700015407027
Personalization:Personalization:Personalization:
SIM: DisabledSIM: DisabledSIM: Disabled
Network:Active(MEP2)Network:Active(MEP2)Network:Active(MEP2)
Network Subset: DisabledNetwork Subset: DisabledNetwork Subset: Disabled
Service Provider:Disabled(MEP4)Service Provider:Active(MEP4)Service Provider:Active(MEP4)
Corporate: DisabledCorporate: DisabledCorporate: Disabled


Option 1: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.

1.    Press the Menu key.

2.    Scroll to and select Manage Connections. Select Turn All Connections Off.

3.    Press the red end key or the Escape key to go back to the Home screen.

4.    Scroll to and select the Options icon.

5.    Scroll to and select Advanced Options.

6.    Scroll to and select SIM Card.

7.    Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.

8.    Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP and "Alt" and number 2; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9.    Enter the MEP2 code we send you.

10.  Press Enter (Press the trackball for 8830),  you should see "Code Accepted"

11.  Press and hold power key to turn the handset off and then back on.

12.  Once the device has powered on, follow steps 1 & 2 and restore connections.


Option 2: Before you start, you MUST have a Sim Card inside the phone (could be Active or Inactive) & turn OFF ALL wireless radios.

1.    Press the Menu key.

2.    Scroll to and select Manage Connections. Select Turn All Connections Off.

3.    Press the red end key or the Escape key to go back to the Home screen.

4.    Scroll to and select the Options icon.

5.    Scroll to and select Advanced Options.

6.    Scroll to and select SIM Card.

7.    Type MEPD Note: When typing in MEPD the letters will not appear on the screen.

8.    Type MEP then hold "Alt" key and type number 2. Note: When typing in MEP Alt 2 the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9.    Enter the MEP2 code we send you.

10.  Press the trackball ("Code Accepted" should display).

11.  Type MEP then hold "Alt" key and type number 4.

12.  Enter the MEP4 code we send you.

13.  Press the trackball ("Code Accepted" should display again).

14.  Press and hold the red End key to turn the handset off and then back on.

15.  Once the device has powered on, follow steps 1 & 2 and restore connections.


Option 3: Before you start, you MUST have Sim Card inserted & turn OFF ALL wireless radios, turn the phone sideways so you get the full QWERTY keypad.

1.    Press the Menu key.

2.    Scroll to and select Manage Connections. Select Turn All Connections Off.

3.    Press the red end key or the Escape key to go back to the Home screen.

4.    Scroll to and select the Options icon.

5.    Scroll to and select Advanced Options.

6.    Scroll to and select SIM Card.

7.    Type MEPD Note: When typing in MEPD the letters will not appear on the screen, this step open up the personalization on the device.

8.    Type MEP then hold "Alt" key and type number 4. Note: When typing in MEP and "Alt" and number 4; the letters/number will not appear on the screen, this step open up the "Enter Network MEP" box.

9.    Enter the MEP4 code we send you.

10.  Press Enter (Press the trackball for 8830),  you should see "Code Accepted"

11.  Press and hold power key to turn the handset off and then back on.

12.  Once the device has powered on, follow steps 1 & 2 and restore connections.
 

Here are the SPC/MSL CDMA Unlock Codes
MSL/SPC Code:  To use this code:

1.    From the home screen of the Blackberry, press the green call button to enter the phone.

2.    Type in ##MSL/SPC CODE then the green talk button (ie: ##123456 Green talk button).

3.    In the CDMA service edit screen, delete the number in the first row (000000xxxx) and replace it with your current phone number.

4.    Press the menu key and choose save.

5.   The device will re-boot. 

When the device re-boots, Activation Required will be gone and the active carrier name will now appear.

 

Known issue for Verizon 8830 World Edition & 9530 Storm, 9550 Storm 2, Tour 9630:

1.    If your Storm is not recognizing the network, make sure your phone battery is full and the radio is on.

 

2.    Sometimes the phone requires you to do "MEPPD" and "MEPP2" instead of "MEPD" and "MEP2".  If this occurs, redo unlock step above with "MEPPD" and "MEPP2"

 

 

3.    If the network not working after your phone is fully charged and unlocking process "Code Accepted".  You must change from Verizon CDMA network to GSM Global Network a few times, after change from Verizon CDMA to GSM Global 3 times is completed, leaves it on GSM Global Network.  Now it should work. (Verizon 8830 World Edition DOES NOT work in USA )

 

 

 

Removing "Activation Required" on the screen for Verizon Storm:

1.    On the main screen, press ##000000

2.    For the Mobile Directory Number, Enter your phone number in here.

Press the Menu to save the options and the phone will automatically restart.

This free website was made using Yola.

No HTML skills required. Build your website in minutes.

Go to www.yola.com and sign up today!

Make a free website with Yola